Trunk Lid for 2020 Mercedes-Benz AMG® GT C
No.
Part # / Description / Price
Price
30
Hexagon Head Bolt 
Mercedes-Benz
Mercedes-Benz Description: M6x20. At air conditioner case or heater case.
MSRP $3.50
$2.69
MSRP $3.50
$2.69
50
MSRP $16.00
$12.29
60
MSRP $1.50
$1.15
70
MSRP $28.50
$21.76
90
Hexalobular Screw Mercedes-Benz
Mercedes-Benz Description: Handle to ratchet rod. Instrument panel to cowl.
MSRP $3.60
$2.75
MSRP $3.60
$2.75
100
Seal, Rear Area Mercedes-Benz
Mercedes-Benz Notes: THE OLD PART MUST NO LONGER BE INSTALLED
Description: Trunk lid.
MSRP $190.00
$139.08
MSRP $190.00
$139.08
120
Hexalobular Screw Mercedes-Benz
Mercedes-Benz Description: Locking clamp,or closing aid,to rear lid.
MSRP $1.40
$1.02
MSRP $1.40
$1.02
230
MSRP $8.50
$6.53
240
T-Piece Mercedes-Benz
Mercedes-Benz Description: Between expansion reservoir and rear and front axle master cylinder. Venting for master cylinder,front axle and rear axle.
MSRP $3.40
$2.60
MSRP $3.40
$2.60
250
MSRP $7.25
$5.50
260
Felt Strip Mercedes-Benz
Mercedes-Benz Description: Scuff protection for electric cables left. For curtain. Felt strip. Soundproofing. Dampening, antenna amplifier to rear-end door. In liftgate trim 70X55X3MM.
300
MSRP $1,640.00
$1,248.41
320
Nut-And-Washer Assembly Mercedes-Benz
Mercedes-Benz Description: Sliding roof frame to side wall. M5-sp. Rear spoiler to rear-end door. Spoiler to rear lid. Left trim strip.
MSRP $1.70
$1.31
MSRP $1.70
$1.31
340
Hexalobular Screw Mercedes-Benz
Mercedes-Benz Description: Holder to rear-end door
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. SPOILER FASTENING
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm.
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. SPOILER FASTENING
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm.
MSRP $1.40
$1.05
MSRP $1.40
$1.05
350
Hexalobular Screw Mercedes-Benz
Mercedes-Benz Description: Fastening, spoiler at carrier. M6X12
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Holder mount.
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Holder mount.
MSRP $1.20
$0.90
MSRP $1.20
$0.90
520
MSRP $145.00
$108.75
530
MSRP $1.60
$1.18
560
MSRP $4.60
$3.53
